Technical Characteristics - Gima 28105 Mode D'emploi

Masquer les pouces Voir aussi pour 28105:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

If the tray-like container presents any abnormal situation (such as softening or cracks), do not introduce any solution and do not
proceed with the inhalation. Contact the technical service and describe the methods and type of drugs used.
13.
Remember to:
Only use this device with medicines prescribed by your doctor;
Carry out the treatment only using the accessory indicated by the doctor according to the pathology.
The manufactured cannot be held liable for accidental or indirect damages should the device be modified, repaired
without authorization or should any of its component be damaged due to accident or misuse.
Any minimal modification / repair on the device voids the warranty and does not guarantee the compliance with the
technical requirements provided by the MDD 93/42/EEC (and subsequent changes) and its normatives.
Model
Typology (MDD 93/42/EEC)
Power Feeding
Power Consumption
Fuse
Max Pressure
Max Air Flow
Operating Pressure
Operating Air Flow
Neb-Rate (with 4ml of 0.9% NaCl solution)
MMAD
GSD
Weight
Size
Noise Level (measured as specifications of EN 13544-1)
Duty Cycle (to 40°C and 110% operating voltage)
Min Capacity Nebulizer
Max Capacity Nebulizer
Working Condition
Conservation condition and Transport

TECHNICAL CHARACTERISTICS

~
0.50 ml/min with 4ml of 0.9% NaCl solution
Room Temperature:
Room humidity percentage
Altitude:
Room Temperature:
Room humidity Percentage:
SIMBOLOGY
Class II isolation equipment
CE marking in conformity with EC directive 93/42/EEC and subsequent changes
Manufacturer:
GIMA S.p.A. - Via Marconi, 1 - 20060 Gessate (MI) - Italy
Date of manufacture
Attention, read the warning notices
Read instructions for use
Applied part type B
Conservation temperature: -25 ÷ 70°C
Keep away from sunlight
Keep in a cool, dry place
Alternate Current
12
CORSIA
Class IIa Medical device
230V ~ / 50 Hz
184 VA
F 1 x 1.6A L 250V
250 kPa (2.5 Bar)
16 l/min
130 kPa (1.3 Bar)
5.2 l/min a 130 kPa
3.25 µm
3.45
2.20 Kg
255 x 190 x 165 (h) mm
Approx. 57dB (A)
Non-Stop Operated
2ml
6ml
10 ÷ 40° C
30 ÷ 75% RH
0 ÷ 2000m s.l.m
- 40 ÷ 70° C
10 ÷ 100% RH

Publicité

Table des Matières
loading

Table des Matières