Remote Control Pad; Starting Sequence - RTI NANO Série Mode D'emploi

Manual: RTI NANO Series
9. Remote Control Pad (optional available)
If the device is equipped with the optional detachable remote control pad, the following ima-
ges explain the use of the pad. Touch the screen to change the settings.

9.1. Starting sequence

Key switch with key:
Insert key and turn it to
‚on' to start the device.
9.2. Main Menu
Laser status, amperage
& interlock status
display
Version and tempera-
ture display
Laser on / off:
Device is enabled /
disabled
page 17 / 59
Emission Laser on button:
The device is enabled if the
diode is lit.
Laser on / internal: Laser on / ILDA in:
The internal access The external access
to an e.g. SD-card is through ILDA is ena-
enabled bled
Emergency Stop
button:
Press button to inter-
rupt laser output
Touchscreen
Status display
Back:
Use this button to return
back.
DMX, Adv. and Setup:
Use these buttons for the
color or scan settings.
Adv. Setup only for factory
defaults!
Color & Scan Setup:
Use these buttons for co-
lor or scan settings