VINCENT STU-400 Manuel D'utilisation page 31

If a wall socket is available for the VHF antenna connection of satellite, cable or a roof aerial, connect its
radio socket with the input socket "FM 75Ω" (10) on the appliance. Use a 75Ω antenna cable for this pur-
pose. If such a socket is not present, the wire antenna supplied or a room antenna available from a local
stockist can be connected.
If you wish to receive medium wave stations (AM), connect the loop antenna supplied to the terminal mar-
ked "LOOP ANTENNA" (11). Placement and direction of frame antenna have a great influence on the qua-
lity of reception. In case none of the possible/recommended positioning options of this antenna provides
a satisfactory reception, an AM outdoor antenna should be used.
STU-400
Connect the RCA output sockets "OUTPUT" (12) with the sockets of the high level input of the preampli-
fier, integrated amplifier, receiver or another suitable device (headphone amplifier, recording input of a
tape recorder etc.). In most cases the input is labelled "TUNER," "LINE IN" or "INPUT FRONT R/L". More
information you will find in the user manual of this device.
STU-400
CONNECTING THE ANTENNA
CONNECTION TO AMPLIFIER,
RECEIVER OR PREAMPLIFIER
RCA connexion
Wire Antenna
or Room Antenna
TV R
Wall Socket
I NP U T
S6 S5 S4 S3
LOOP ANTENNA
Preamplifier,
Amplifier etc.
Vincent
31