VINCENT STU-400 Manuel D'utilisation page 25

1 2
1. POWER
This is the main power switch for turning on and
off the device. The tuner is separated from the
mains voltage when switched off and cannot be
set into a standby state.
2. TUNING MODE
With this button you determine the functionality
of "TUNING" (3): make them do a manual
frequency scan, an automatic search run or
switch between saved stations.
3. TUNING PRESET:
Here, a search run through the frequency band
can be initiated (automatic, manual or through all
station memory).
4. Display
In normal operation shows either the name of the
selected input channel or frequency and RDS
information of the radio stationed it is tuned to. In
tuner mode additional information about the ope-
ration mode is shown.
FRONT VIEW
3
4
5
5. ST/MONO
With this, one can switch over between stereo
and mono reception in the operating mode "FM".
It is an important option for receiving FM stations
with weak signals.
6. PR
By pressing this button a station will jump back,
of the station list.
7. AM/FM
This button helps in switching over between recei-
ving FM stations and medium wave stations (AM).
8. PR
By pressing this button a station will jump
forward, of the station list.
9. RDS MODE
With this button the various RDS services can be
displayed on the front panel or the RDS system
can be switched off.
9 8
6 7
Vincent
25