VINCENT STU-400 Manuel D'utilisation page 26

10 11
10. 75Ω FM ANTENNA: VHF antenna socket
Connect a coaxial antenna cable here for FM
radio reception. If there is no antenna wall socket,
a room antenna or the wire antenna supplied can
be used.
11. LOOP ANTENNA:
Socket for the AM antenna
Connect the loop antenna supplied or an outdoor
antenna here if you require medium wave reception.
12. OUTPUT: Stereo Audio Output
Via this high-level output, the tuner is connected to
an amplifier, preamplifier etc..
Vincent Vincent
26 26
REAR VIEW
12
13. POWER CONTROL (12V): ON/OFF control
These jack connectors (3.5 mm) receive and for-
ward the signal for the standby control (12V
Trigger).
14. FUSE: Fuse holder
This small plastic housing holds the fuse. Refer to
the security precautions.
15. AC 220-240V: Power Connector
To establish the power supply, connect the plugs
of the power cable to the device and to a suitab-
le wall outlet.
13 14 15