JBL Control 400 Micro Serie Manuel Du Propriétaire page 15

Figure 20: Adjustable Metal Strap
Step 6 – Close and Secure TERMINAL COVER – Close the
terminal cover and secure it with the screw that is captive in
the TERMINAL COVER.
Figure 22: Closing TERMINAL COVER and tightening the screw
Step 7 – Tighten STRAIN RELIEF clamping mechanism with
the included 2 screws.
Figure 23: Tightening the Strain Relief Clamping Mechanism
(Shown with STRAIN RELIEF on the top location and with
unjacketed wires)
IMPORTANT:
Always follow building codes and
regulations for the area and type
Step 8 – Insert the Speaker into the Ceiling and Tighten.
Insert the speaker into the ceiling cutout as far as it goes, until
the back of the front baffle rim touches the ceiling.
Figure 24: Insert Speaker through Ceiling Cutout
Tighten Dogears -- IMPORTANT -- For each attachment
screw, FIRST turn ½ turn COUNTER-CLOCKWISE to release the
dog-ear mounting tab from its storage location.
Then tighten the mounting tabs by turning the screw
CLOCKWISE until tight onto the top of the ceiling surface.
Adjust the torque to meet the characteristics of the ceiling
material DO NOT OVERTIGHTEN.
Figure 25: Tighten Dogear Mounting Tabs
of construction.
15