JBL Control 400 Micro Serie Manuel Du Propriétaire page 10

Table 1:
Pre-Installation Brackets
Model
Control 414C/T Micro,
Control 414CT MicroPlus
USING INCLUDED C-BRACKET WITH SHEETROCK
For most installations, the INCLUDED C-shaped backing plate provides adequate reinforcement to the ceiling material, distributing
out the clamping force from the dogears. Even if one of the dogears lands on the opening between ends of the C, the rest of the
dogears will land on it, so will be sufficient support for sheetrock installations.
CEILING CUTOUT SIZES
Packaged with the speakers are cardboard cutout templates for scribing the cutout hole onto your ceiling surface.
Table 2: Cutout Sizes
Model
Control 414C/T Micro, Control 414CT MicroPlus
OPTIONAL BG (black) and SG (square) GRILLES
Optional round black and white square magnetic grilles are available. The JBL-MTC-xxxBG grilles are round Black Grilles
that can be utilized instead of the included stock white grille when black is called for. Alternatively, the stock white grille can be
painted (see below). The JBL-MTC-xxxSG are white Square Grilles that can be utilized instead of the included stock grille when
a square grille is desired. These grilles can be painted to the desired color (including black). These grilles completely cover the
speaker assembly.
Model
Control 414C/T Micro, Control 414CT MicroPlus
10
New Construction Bracket
JBL-MTC-424NC
Cutout Size (diameter)
168 mm (6.6 in)
Black Round Grilles
JBL-MTC-414BG
Plaster-Ring Bracket
JBL-MTC-424MR
Square Grilles
JBL-MTC-414SG