Battery Replacement - TFA ScanTemp 330 Mode D'emploi

TFA_No. 31.1134_Anl_02_21
ScanTemp 330 - Infrared Thermometer
• The unit cannot measure through transparent surfaces such as glass or plastic. It will
measure the surface temperature of the glass instead.
7. Care and maintenance
• The sensor lens is the most delicate part of the thermometer. Please protect the sensor
part from dirt.
• Clean your instrument with a soft damp cloth. Do not use solvents or scouring agents.
• Remove the battery if you do not use the product for a long period of time.

7.1 Battery replacement

• Change the battery, when the battery symbol
• Confirm the advice is power off before changing battery.
8. Troubleshooting
Problems Solutions
➜ Switch on the unit – press the measuring button
No display
➜ Ensure that the battery polarity is correct
➜ Change the battery
➜ Measured temperature is outside measuring range
Display "HI/LO"
If your device fails to work despite these measures contact the supplier from whom you
purchased it.
9. Waste disposal
This product has been manufactured using high-grade materials and components which
can be recycled and reused.
Never dispose of empty batteries and rechargeable batteries in household
waste. As a consumer, you are legally required to take them to your retail
store or to an appropriate collection site depending on national or local regu-
lations in order to protect the environment.
The symbols for the heavy metals contained are: Pb=lead
This instrument is labelled in accordance with the EU Waste Electrical and
Electronic Equipment Directive (WEEE).
Please do not dispose of this instrument in household waste. The user is
obligated to take end-of-life devices to a designated collection point for the
disposal of electrical and electronic equipment, in order to ensure environ-
mentally-compatible disposal.
10. Specifications
Temperature range: -50 °C ...+ 330 °C / -58 °F...+626 °F
Operating environment: 0 °C ...+ 50 °C / +32 °F...+122 °F
Accuracy: -50°C...0°C / -58°F...+32°F: ±4 °C / 9 °F
0°C...+ 330°C / +32...+626 °F: ±2 °C / 4 °F
Laser: Output < 1 mW, 630....670 nm
Emissivity: 0.95 only
10
06.02.2021 11:52 Uhr Seite 6
appears on the display.
ScanTemp 330 - Thermomètre infrarouge
Resolution: 0.1°C / 0.1 °F
Response time (90%): < 1 second
Optical resolution: 12 : 1
Power consumption: 9 volt battery
Automatic off-function: approx. 10 seconds
Dimensions: 32 x 78 x 133 mm
Weight: 97 g (instrument only)
TFA Dostmann GmbH & Co.KG, Zum Ottersberg 12, D-97877 Wertheim, Germany
No part of this manual may be reproduced without written consent of TFA Dostmann. The
technical data are correct at the time of going to print and may change without prior notice.
The latest technical data and information about this product can be found in our homepage
by simply entering the product number in the search box.
www.tfa-dostmann.de 02/21
11