H.Koenig MX18 Manuel D'utilisation page 5

6. Turn on your robot and push the food down with the pusher. Never
put your fingers inside the supply tube. Wait until the feeding tube is
empty before adding more food.
7. After inserting all your ingredients, let the appliance run a little over
20 seconds to extract all the juice.
8. Do not use your robot if the rotating strainer is damaged.
SMALL BOWL MIXER :
1. Attach the rotating accessory and the bowl onto the base unit.
2. Attach the small bowl mixer.
3. Place the small knife blade onto the rotating accessory.
4. Add ingredients into the bowl.
5. Close the lid and turn on your robot.
Be sure to clean all accessories before the first use.
• Turn off and unplug your appliance before cleaning.
• Handle blades and cutting discs with care as they are extremely sharp.
• Some foods can stain the plastic of your robot. This is quite normal and does not damage
the appliance nor alter the taste of your dishes. Simply rub the plastic with a cloth soaked in
vegetable oil to remove discoloration and clean surfaces in contact with food.
• To clean the base of the robot, use a dry cloth.
• You can clean different parts of the robot (except the base that contains the motor) with
water and mild soap. When clean, wipe the parts with a dry cloth.
• These accessories can be washed in the dishwasher, nevertheless repeated washing can
damage the appearance and strength of plastics. A hand washing will prolong the life of
your device.
ENVIRONMENT
CAUTION :
Do not dispose of this product as it has with other household products. There is a
separation of this waste product into communities, you will need to inform your local
authorities about the places where you can return this product. In fact, electrical and
electronic products contain hazardous substances that have harmful effects on the environment or
human health and should be recycled. The symbol here indicates that electrical and electronic
equipment should be chosen carefully, a wheeled waste container is marked with a cross.
CLEANING
Manufactured and imported : Adeva SAS 8 rue Marc Seguin 77290 Mitry-Mory FRANCE
www.hkoenig.com - contact@hkoenig.com - Tel 01 64 67 00 01