H.Koenig MX18 Manuel D'utilisation page 3

Accessoires pour robot multifonctions
Masquer les pouces Voir aussi pour MX18:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 6
• Switch off the appliance and disconnect from supply before changing accessories or
approaching parts that move in use.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
• The accessories are use with the machine only. And the whole machine is use for food
only.
• Thoroughly clean the parts that come into contact with food before you use the appliance
for the first time.
• Care shall be taken when handling the sharp cutting blades, emptying the bowl and during
cleaning.
• To preserve and ensure a long life for your appliance, do not use it more than 3 minutes at
a time. After 3 minutes of continuous use, let the motor cool for about 30 minutes before
using it again.
1 - Whisk
2 - Grinder and filter cover
3 - Small bowl mixer
4 - Citrus juicer
5 - Centrifugal juicer
Once the desired accessories in place, remember to adjust the speed controller. If you want
a slow movement, put the position: "little". If you want a fast moving, put
the contrary position. If you press the switch button, the unit starts, if you
release it, it stops.
WHISK :
The whisk is used only for light mixtures such as egg whites, cream or
milk. "Heavy" blends such as flour may damage the accessory.
PRODUCT
USAGE

Publicité

Table des Matières
loading

Table des Matières