Firmware Upgrade; Factory Reset; Hardware Reset - Zappiti Neo Guide De Démarrage Rapide

22
Quick Start Guide

Firmware Upgrade

Usually, if a new firmware is available, you will be informed on the sartup of the player. To access the
Firmware upgrade page and manually launch the update of firmware online, go to Setup >
Miscellaneous > Firmware Upgrade. You will see the current firmware version. Click on Check
Available Update. If a new version is available, you will be able to download it and install it. If there is
no new firmware version available, a popup windows will appear to confirm it. To manually upgrade the
firmware using a USB flash drive, please visit the Zappiti Knowledge Base:
zappiti.uservoice.com/knowledgebase

Factory Reset

In some cases, a factory reset may be required.
Be careful, however, this will reset all your Zappiti settings and account information.
1. Go to Setup > General
2. Click Reset Settings button, then click on Reset settings to confirm the procedure.
3. Please wait during the reset process.
Warning! Do not restart or switch off your Zappiti during the full process

Hardware Reset

If you do not get any video signal, you can boot into Recovery menu:
1. Start the Zappiti.
2. During power-on press and hold Reset button located
on the back of the Zappiti using a paper clip.
3. Then do "Wipe data".
DISCLAIMER
On some cases — especially if you come from a more recent firmware — during
the process, the TV screen can switch to GREEN or BLACK for a while. This is
normal! Please absolutly not restart or switch off your Zappiti during the full
process. In such case, please wait 10 min before to restart your Zappiti unit.
Open
Paper clip
Paper clip