Volume Control - LENCO Classic Phono TT-33 Mode D'emploi

4. Operation
Use the POWER CABLE to connect the unit with the power outlet.
POWER ON
Turn the unit on by rotating the POWER/VOL located on the front panel to power on the unit.

VOLUME CONTROL

Rotate the POWER/VOL on the front panel of the unit to adjust the volume to a comfortable level.
STEPS OF PLAYING RECORDS
Release the TONE ARM from the ARM LOCK/REST.
SELECT SPEED: Set the R.P.M 33⅓, 45, 78 SELECTION to the desired speed of the records.
AUTO STOP
Choose whether the records stop automatically when finished playing by the AUTO STOP ON/OFF
SWITCH. If the AUTO STOP ON/OFF SWITCH turns on, the record will stop turning when it comes to
its end.
Gently place the record on the TURNTABLE.
Gently lift the TONE ARM and move it to the desired starting point on the records.
LINE OUT CONNECTION
- Connect the Auxiliary cable (not supplied) to the LINE OUT JACK on the rear of the record
player and the other end of the cable to the auxiliary inputs of the external component, e.g.
another Hi-Fi unit, Amplifier, etc.
- Check the volume level of your external component and adjust it if necessary.
- Refer to the instruction manual of the external component for its correct operation.
SUBWOOFER OUTPUT JACK
The subwoofer output jack enables you to attach an active subwoofer (not supplied) which will
enhance bass response. Please contact your retailer for suitable subwoofer models.
AUX IN CONNECTION & OPERATION
Any component with an Audio Output, such as for instance a DAB Radio module, CD/Cassette Player,
MP3 Player can be connected by using a cable with a 3.5mm dia. jack plug (a 3.5mm AUX IN cord is
supplied).
- Turn the unit on and adjust the volume.
8