Setting The Speed - UFLOOR WOLFF Vario-Stripper SILENT Traduction Du Mode D'emploi Original

5.1 Pull Back
The patented Pull Back system was developed to allow for an
easy pulling back of the Extro Stripper. (Pic. 2)
When you have reached a wall or another obstacle during your
work, simpy pull the handle to lift the driving wheels. The machi-
ne comes to a standstill although the wheels continue to rotate.
If you pull the handle more powerfully, you can pull back the
machine to the place where the next lane is to be stripped off.
If the handle is moved forward again, the driving wheels reach
the floor again and the machine moves forward.
When working, make sure the handle is pressed gently to the
front so that the small transportation rollers are lifted..

5.2 Setting the speed

To adapt the Vario-Stripper SILENT to different floorings, adjust
the speed. The optimum speed depends on the type of flooring,
the adhesive and the ambient temperature.
Therefore generally valid statements cannot be given.
If the blade jumps on top of the flooring, reduce the speed.
5.3 Setting the angle of the blade
The blade angle can be varied with three different angle
adapters. The stripper is delivered with the 15° angle adapter
mounted. The angles of the two other adapters are 25° and 35°.
Optimum angle of the blade
The optimum angle of the blade depends on the type of flooring,
the adhesive and the subfloor.
Due to the variety of working conditions generally valid state-
ments cannot be given.
If the blade jumps on top of the flooring, set the angle steeper.
Set the angle flat with soft subfloors like particle boards or wood.
Otherwise you might deteriorate the subfloor.
05/2008 Vario-Stripper SILENT , #038764Fu
(pic. 3)
Bild 1
(pic. 1)
(pic. 2)
Abweiser Guss Blade holder
Hexagon bolt
Sechskantmutter
Replacement
Ersatzmesser
blade
Flachrundschraube
Screw machine russ
mit Vierkantansatz
Blechschwinger Striker Foot
Casting
angle adapter
Winkeladapter 15°
Hexagon nut Sechskantmutter
Screw
Flachrundschraube
machine truss
mit Vierkantansatz
13