Les langues disponibles

Les langues disponibles

Liens rapides

See Warranty on page 8 for important information about commercial use of this product.
Operating Instructions
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
Oil-Lubricated Compressors
Description
This residential oil-lubricated
compressor is designed for do-it-
yourselfers with a variety of home and
automotive jobs. These compressors
power spray guns, impact wrenches
and other tools. Compressed air from
this unit will contain moisture. Install a
water filter or air dryer if application
requires dry air.
Safety Guidelines
This manual contains information that is
very important to know and
understand. This information is provided
for SAFETY and to PREVENT EQUIPMENT
PROBLEMS. To help recognize this
information, observe the following
symbols.
an imminently hazardous situation
which, if not avoided, will result in
death or serious injury.
a potentially hazardous situation
which, if not avoided, could result in
death or serious injury.
a potentially hazardous situation
which, if not avoided, may result in
minor or moderate injury.
important information, that if not
followed, may cause damage to
equipment.
Unpacking
After unpacking the unit, inspect
carefully for any damage that may have
occurred during transit. Make sure to
tighten fittings, bolts, etc., before
putting unit into service. In case of
REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for
© 2007 Campbell Hausfeld/Scott Fetzer
STOP!
Record the Model No., Serial No. and
date of purchase located on the base
below the pump in the space below.
Model No. ____________________
Serial No. ____________________
Danger
Date of purchase _________________
indicates
Retain these numbers for future
reference.
Warning
questions, damaged or missing parts,
indicates
please call 1-800-543-6400 for customer
assistance or call the nearest Campbell
Hausfeld Authorized Service Center.
Caution
Have the serial number, model number,
indicates
and parts list (with missing parts circled)
before calling.
Notice
indicates
unit if damaged during shipping,
handling or use. Damage may result in
bursting and cause injury or property
damage.
unattended. Leaving compressor in
AUTO position may allow it to turn on
inadvertently. To prevent this and
possible damage from power surge,
turn to OFF position after each use.
safekeeping.
For parts, product & service information
visit www.chpower.com
DO NOT RETURN THE
PRODUCT TO THE
RETAILER!
Do not
operate
Do not
run
Breathable Air Warning
This compressor/pump is not
equipped and should not be
used "as is" to supply breathing
quality air. For any application
of air for human consumption,
the air compressor/pump will
need to be fitted with suitable
in-line safety and alarm
equipment. This additional
equipment is necessary to
properly filter and purify the air
to meet minimal specifications
for Grade D breathing as
described in Compressed Gas
Association Commodity
Specification G 7.1 - 1966, OSHA
29 CFR 1910. 134, and/or
Canadian Standards
Associations (CSA).
DISCLAIMER OF WARRANTIES
In the event the compressor is
used for the purpose of
breathing air application and
proper in-line safety and alarm
equipment is not
simultaneously used, existing
warranties shall be voided, and
Campbell Hausfeld disclaims
any liability whatsoever for any
loss, personal injury or damage.
CALIFORNIA PROPOSITION 65
You can create dust when
you cut, sand, drill or grind
materials such as wood,
paint, metal, concrete, cement, or other
masonry. This dust often contains
chemicals known to cause cancer, birth
defects, or other reproductive harm.
Wear protective gear.
IN622500AV 11/07
Table des Matières
loading

Sommaire des Matières pour Campbell Hausfeld Air Compressor

  • Page 1 For any application this unit will contain moisture. Install a of air for human consumption, water filter or air dryer if application the air compressor/pump will requires dry air. need to be fitted with suitable in-line safety and alarm Safety Guidelines equipment.
  • Page 2: General Safety Information

    Wash hands after handling. 16. Do not direct paint or other sprayed abnormally vibrate, STOP the material at the compressor. Locate Since the air compressor and other engine/motor and check compressor as far away from the components (filters, lubricators, hoses, immediately for the cause.
  • Page 3 Assembly ELECTRICAL INSTALLATION (Continued) Grounding adding oil gradually and checking the wiring oil level with the sight glass several TEST RESET and electrical connections should be times. Add enough oil to reach the performed by a qualified electrician. Installation must be in accordance with “max”...
  • Page 4: Before Each Start-Up Operating Procedure

    Oil-Lubricated Compressors Operation MOISTURE IN COMPRESSED AIR (Continued) Moisture in compressed air will form into droplets as it comes from an air • Exhaust Tube - This tube carries compressor pump. When humidity is high or when a compressor is in compressed air from the pump to the continuous use for an extended period of time, this moisture will collect in check valve.
  • Page 5: Asme Safety Valve

    Maintenance Operation (Continued) Filter element ASME SAFETY VALVE Do not Disconnect power source and remove then release all pressure from or attempt to adjust the safety valve! the system before attempting to install, service, relocate or perform Check the safety valve by performing any maintenance.
  • Page 6: Troubleshooting Chart

    Oil-Lubricated Compressors Troubleshooting Chart Symptom Possible Cause(s) Corrective Action Compressor will not run 1. Switch in OFF position 1. Make sure compressor is plugged in and switch is ON. 2. No electrical power at wall outlet 2. Check circuit breaker or fuse at electrical panel. 3.
  • Page 7 Troubleshooting Chart (Continued) Symptom Possible Cause(s) Corrective Action Compressor runs 1. Excessive air usage, compressor too 1. Decrease usage or purchase unit with higher air continuously and air small delivery (SCFM). output is lower than 2. Clogged intake filter 2. Clean or replace. normal/low discharge 3.
  • Page 8 8. RESPONSIBILITIES OF PURCHASER UNDER THIS WARRANTY: A. Provide dated proof of purchase and maintenance records. B. Portable compressors or components must be delivered or shipped to the nearest Campbell Hausfeld Authorized Service Center. Freight costs, if any, must be borne by the purchaser.
  • Page 9: Compresseur Graissé Par L'huile

    Portez de l’équipement 1-800-543-6400 pour demander conseil de protection. RECORDATORIO: ¡Guarde su comprobante de compra con fecha para fines de la garantía! Adjúntela a este manual o archívela en lugar seguro. © 2007 Campbell Hausfeld/Scott Fetzer IN622500AV 11/07 9 Fr...
  • Page 10: Généralités Sur La Sécurité

    Compresseur Graissé par l'Huile inflammable. Ne jamais ranger de Généralités Sur La PRÉCAUTIONS DE PULVÉRISATION liquides ou gaz inflammables près du Sécurité compresseur. Ne pas pulvériser les matériaux inflammables dans produit Les pièces du compresseur un endroit de flamme ouverte ou son cordon contient du plomb, un peuvent être chaudes, même ni près d’une source d’ignition y compris...
  • Page 11: Fonctionnement

    Un espace libre minimum de 45,7 centimètres entre le compresseur et un Broche de Terre mur est exigé pour éviter le stoppage d’air TEST RESET par des objets. Max. Ne pas situer la Prise de Courant Mise de Terre prise d’air du compresseur près de la vapeur, un jet pulvérisé...
  • Page 12: Avant Chaque Démarrage Procédure De Fonctionnement

    Compresseur Graissé par l'Huile Fonctionnement ce qu'il atteigne la pression d'arrêt (Suite) automatique. • Régulateur - Le régulateur sert à 6. Fixer le mandrin de pneu ou l'outil à régler la pression d’air à la sortie du l'extrémité du tuyau. tuyau.
  • Page 13: Entretien

    Fonctionnement toute la pression du système avant bloqué peut réduire la performance du (Suite) d’essayer d’installer, de réparer, de compresseur et provoquer une SOUPAPE DE SÛRETÉ ASME déplacer ou de procéder à l’entretien. surchauffe du compresseur. Ne jamais Inspecter le compresseur souvant et 1.
  • Page 14: Guide De Dépannage

    Compresseur Graissé par l'Huile Guide De Dépannage Symptôme Cause(s) Possible(s) Mesures Correctives Le compresseur ne 1. Interrupteur à la position OFF (arrêt) 1. S'assurer que le compresseur est branché et fonctionne pas l'interrupteur à ON (marche). 2. Aucun courant à la prise. 2.
  • Page 15: Guide De Dépannage (Suite)

    Guide De Dépannage (Suite) Symptôme Cause(s) Possible(s) Mesures Correctives La pression du réservoir 1. Robinet de vidange desserré 1. Resserrer. tombe lorsque le 2. Vérifier toute fuite de soupape 2. Retirer le clapet de non-retour. Nettoyer ou remplacer. compresseur est éteint 3.
  • Page 16: Garantie Limitée

    Maxus ont une garantie de cinq (5) ans. 2. GARANTIE ACCORDÉE PAR (GARANT) : Campbell Hausfeld/Scott Fetzer Company, 100 Production Drive, Harrison, Ohio, 45030, Téléphone: (800) 543-6400. 3. BÉNÉFICIAIRE DE CETTE GARANTIE (ACHETEUR): L’acheteur original (sauf en cas de revente) du produit Campbell Hausfeld.
  • Page 17 Hausfeld no asumirá NINGUNA llame al Centro De Servicio Autorizado De ocasionarle la muerte o heridas de responsabilidad por pérdidas, heridas Campbell Hausfeld más cercano. Tenga a gravedad. personales o daños. mano el número de serie, el número del Esto le...
  • Page 18: Informaciones Generales De Seguridad

    Compresor lubricado con aceite PRECAUCIONES PARA ROCIAR Informaciones Generales de Seguridad Las piezas del compresor podrían estar calientes, Nunca rocíe materiales inclusive cuando la unidad inflamables cerca de llamas Este esté apagada. al descubierto o fuentes de producto o su cable de corriente 9.
  • Page 19 Terminal conexión Máx. a tierra TEST RESET Tomacorrientes conectado a tierra Figura 1 – Nivel adecuado de aceite Figura 3 - Método de conexión a tierra Cordones de extensión para los modelos de 120V/15 Amp Figura 5 - Automático Longitud del cordón (m) 7,62 15,24 30,48 terminal de conexión a tierra.
  • Page 20 Compresor lubricado con aceite Funcionamiento HUMEDAD EN EL AIRE COMPRIMIDO La humedad que se acumula en el aire comprimido se convierte en gotas a medida que (Continuacíon) sale del cabezal del compresor de aire. Cuando el nivel de humnedad es muy alto o •...
  • Page 21 Funcionamiento Mantenimiento 1OW-30 en este compresor. Si usa otros tipos de aceite podría tener (Continuacíon) problemas para encenderlo. 5. Cambie el aceite cada 50 horas de VALVULA DE SEGURIDAD ASME Desconecte el cordón uso. eléctrico del tomacorrientes Nunca y libere toda la presión del desconec- MANTENIMIENTO DEL FILTRO DE sistema antes de tratar de instalar,...
  • Page 22: Almacenamiento

    Compresor lubricado con aceite ALMACENAMIENTO 3. Desconecte la manguera y cuélguela con los extremos abiertos hacia 1. Drene la humedad del tanque. abajo, para permitir que drene toda 2. Cuando no esté en uso, guarde el la humedad. compresor en un lugar fresco y seco. Guía de diagnóstico de averías Problema Posible(s) Causa(s)
  • Page 23 Guía de diagnóstico de averías (Continuación) Problema Posible(s) Causa(s) Acción a tomar Golpeteos, zumbidos, y/o 1. Pernos de montaje sueltos 1. Ajuste los pernos. vibración excesiva. 2. El tanque no está nivelado 2. Utilice una cuña/objeto fuerte para poner el tanque a nivel. 3.
  • Page 24: Garantía Limitada

    Estándard (Standard Duty) - Un año; Productos Resistentes (Serious Duty) -Dos años; Productos Robustos (Extreme Duty) - Tres años; Los compresores marca Maxus tienen una garantía de 5 (cinco) años. 2. QUIEN OTORGA ESTA GARANTÍA (EL GARANTE: Campbell Hausfeld / The Scott Fetzer Company 100 Production Drive, Harrison, Ohio 45030 Teléfono: (800) 543-6400 3.

Table des Matières