Campbell Hausfeld FP209501 Instructions D'utilisation
Campbell Hausfeld FP209501 Instructions D'utilisation

Campbell Hausfeld FP209501 Instructions D'utilisation

Montrer les pouces Voir aussi pour FP209501:
Table des Matières
Les langues disponibles

Les langues disponibles

Liens rapides

See Warranty on page 8 for important information about commercial use of this product.
Operating Instructions and Parts Manual
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
Oilless Compressors
Description
Oilless compressors are designed for
do-it-yourselfers with a variety of home
and automotive jobs. These units
operate without oil. Compressed air
from this unit will contain moisture.
Install a water filter or air dryer if
application requires dry air.
Safety Guidelines
This manual contains information that is
very important to know and understand.
This information is provided for SAFETY
and to PREVENT EQUIPMENT PROBLEMS.
To help recognize this information,
observe the following symbols.
Danger indicates an
imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
Warning indicates
a potentially
hazardous situation which, if not avoided,
COULD result in death or serious injury.
Caution indicates a
potentially
hazardous situation which, if not
avoided, MAY result in minor or
moderate injury.
Notice indicates
important
information, that if not followed, may
cause damage to equipment.
Unpacking
After unpacking the unit, inspect
carefully for any damage that may have
occurred during transit. Make sure to
tighten fittings, bolts, etc., before putting
unit into service. In case of questions,
damaged or missing parts, please call
1-800-543-6400 for customer assistance.
Have the date code, model number,
and parts list (with missing parts
circled) before calling.
REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.
© 2010 Campbell Hausfeld/Scott Fetzer
DO NOT RETURN THE
PRODUCT TO THE
STOP!
RETAILER! CALL
1-800-543-6400
Record the Model No., Serial No. and date
of purchase located on the base below the
pump in the space below.
Model No. ____________________
Date Code ____________________
Date of purchase _________________
Retain these numbers for future reference.
Do not operate
unit if damaged
during shipping, handling or use.
Damage may result in bursting and
cause injury or property damage.
General Safety
Information
CALIFORNIA PROPOSITION 65
This product or its
power cord may
contain chemicals, including lead,
known to the State of California to
cause cancer and birth defects or other
reproductive harm. Wash hands after
handling.
GENERAL SAFETY INFORMATION
Since the air compressor and other
components used (filters, lubricators,
hoses, etc.), make up a high pressure
pumping system, the following safety
precautions must be observed at all times:
FP209501, FP209598, FP209599,
FP209601, and FP209699
Breathable Air Warning
This compressor/pump is not
equipped and should not be used "as
is" to supply breathing quality air. For
any application of air for human
consumption, the air
compressor/pump will need to be
fitted with suitable in-line safety and
alarm equipment. This additional
equipment is necessary to properly
filter and purify the air to meet
minimal specifications for Grade D
breathing as described in Compressed
Gas Association Commodity
Specification G 7.1 - 1966, OSHA 29
CFR 1910. 134, and/or Canadian
Standards Associations (CSA).
DISCLAIMER OF WARRANTIES
In the event the compressor is used
for the purpose of breathing air
application and proper in-line
safety and alarm equipment is not
simultaneously used, existing
warranties shall be voided, and the
manufacturer disclaims any liability
whatsoever for any loss, personal
injury or damage.
1. Read all manuals included
with this product carefully.
Be thoroughly familiar
with the controls and the
proper use of the equipment.
2. Follow all local electrical and safety
codes as well as in the US, National
Electrical Codes (NEC) and
Occupational Safety and Health Act
(OSHA).
3. Only persons well acquainted with
these rules of safe operation should
be allowed to use the compressor.
4. Keep visitors away and NEVER allow
children in the work area.
IN619403AV 1/10
MANUAL
Table des Matières
loading

Sommaire des Matières pour Campbell Hausfeld FP209501

  • Page 9 Health Act (OSHA) des É-U. avant d’appeler. MÉMENTO : Gardez votre preuve datée d’achat à fin de la garantie ! Joignez-la à ce manuel ou classez-la dans un dossier pour plus de sécurité. © 2010 Campbell Hausfeld/Scott Fetzer IN619403AV 1/10 9 Fr...
  • Page 10: Sécurité (Suite)

    Compresseur Sans Huile Généralités sur la pour réduire l’accumulation de Ne jamais enlever ou essayer d’ajuster surpulvérisation sur le compresseur. Sécurité (Suite) la soupape de sûreté. Tenir la soupape de 19. Suivre les instructions du fabriquant sûreté libre de peinture et d’autres 3.
  • Page 11: Fonctionnement

    FP209501, FP209598, FP209599, FP209601, FP209699 Installation (Suite) Bouton de régulateur Poignée Manomètre L’usage incorrect d’une fiche mise à Sortie d’aire la terre peut résulter en secousse électrique ! Ne pas utiliser un Interrupteur adaptateur de mise ON/OFF à la terre avec ce produit ! 2.
  • Page 12: Entretien

    Compresseur Sans Huile Fonctionnement L’HUMIDITÉ DANS L’AIR COMPRIMÉ (Suite) L’humidité dans l’air comprimé forme des goutelettes en arrivant de la pompe du compresseur. Si l’humidité est élevée ou si le compresseur est utilisé LUBRIFICATION continuellement, cette humidité s’accumulera dans le réservoir. En utilisant un Ce produit est “sans-huile”...
  • Page 13: Entretien (Suite)

    FP209501, FP209598, FP209599, FP209601, FP209699 Entretien 1. Tension basse. vidanger l’air du réservoir en tirant (Suite) l’anneau de la soupape de sécurité. 2. Ventilation insuffisante. GRAISSAGE À l’aide de l’autre main, détourner Ce modèle “sans huile” n’exige pas de l’air se déplaçant rapidement, pour Si le protecteur de graissage.
  • Page 14: Guide De Dépannage

    Compresseur Sans Huile Guide de Dépannage Symptôme Cause(s) Possible(s) Mesures Correctives Le compresseur ne 1. Interrupteur en position “OFF” 1. S’assurer que le compresseur est branché et que fonctionne pas. (arrêt). l’interrupteur est à ON (marche) 2. Aucun courant à la prise de courant 2.
  • Page 15: Liste De Pièces De Rechange

    FP209501, FP209598, FP209599, FP209601, FP209699 S’il vous plaît fournir l’information suivante : Correspondance concernant les pièces : Pour Pièces de Rechange ou - Numéro du modèle Attn: Customer Service Assistance Technique, - Numéro de série (si applicable) 100 Production Drive - Description de la pièce et son numéro sur...
  • Page 16: Garantie Limitée

    2. GARANTIE ACCORDÉE PAR (GARANT) : Campbell Hausfeld/Scott Fetzer Company, 100 Production Drive, Harrison, Ohio, 45030, Téléphone : (800) 543-6400 3. BÉNÉFICIAIRE DE CETTE GARANTIE (ACHETEUR) : L’acheteur original (sauf en cas de revente) du produit Campbell Hausfeld. 4. PRODUITS COUVERTS PAR CETTE GARANTIE : Ce compresseur d’air Campbell Hausfeld.

Ce manuel est également adapté pour:

Fp209598Fp209599Fp209601Fp209699

Table des Matières