Burley Bark Ranger Manuel Du Propriétaire page 11

Attaching & Removing the Wheels
1
While pressing rubber button, insert
wheel axle into axle receiver, and then
release the button. Pull firmly on wheel to
confirm the axle is fully engaged.
Parking Brake Operation
WARNING
tHE PArKInG BrAKE
IS onLY IntEndEd
to BE uSEd WHEn
tHE trAILEr IS At
A coMPLEtE StoP. uSE
oF tHE PArKInG BrAKE
WHILE In MotIon cAn
rESuLt In dAMAGE, An
AccIdEnt, SErIouS
InJurY, or dEAtH.
BArK rAnGEr & BArK rAnGEr XL
2
For removing wheel: while pressing
button, slide wheel out of the
axle receiver. release button.
1
Ensure the trailer is at a complete stop. rotate the red parking
brake lever so that it points towards the front of the trailer.
the trailer may need to roll forward slightly for the brake to
engage, and the lever to fully rotate.
ENG
to disengage the parking brake, fully rotate
the lever so that it points towards the rear of
DEU FRA ESP
2
the trailer.
ASSEMBLY & uSE
11