Settings Menu; Accessing The Setup Menu - 3M Worktunes Connect + Am/Fm Instructions Utilisateur

BASIC OPERATIONS
WORKTUNES™ CONNECT + AM/FM | MODEL NUMBER: 90572

Settings Menu:

•
Frequency Spacing
•
"9 kHz AM"
•
"10 kHz AM"
•
Volume Limiter Mode
•
"Safe Volume Control"
•
"Limiter"

Accessing the setup menu

To change the Frequency Spacing or Volume
Limiter, you will need to access the setup menu.
When powered off, press and hold the Power
button and the center of the Tuning/Seek button
at the same time for three seconds until you hear,
"Settings Mode". You have to press the center
button otherwise the unit just powers on as normal
if you are pressing up/down. To navigate the
settings menu, press up or down on the Tuning/
Seek button. Settings can be toggled or saved by
pressing in on the Tuning/Seek button. To exit,
press the Function button.
Music Equalizer
Press and hold the Source button.
The device will cycle through the three equalizer
modes – Balanced, Bass Boost, Treble Boost – then
release the button when you reach the desired
mode.
20 English
Tuning/Seek