Programming A Preset; Deleting A Preset - Harman AKG DMM14 U Mode D'emploi

operAting the Device
DMM14 MANUAL
Step Description
With SYSTEM CONTROL, select the PRESET function
1
2 Briefly press the rotary knob for the corresponding input or
output.
•
3 Release the rotary knob after the beep
•
•
8.7.2

Programming a preset

To program a preset, proceed as follows:
Step Description
With SYSTEM CONTROL, select the PRESET function
1
2 Press input rotary knobs (1 to 12) for between 3 and 5 sec-
onds.
•
3 Release the rotary knob after the beep
•
8.7.3

Deleting a preset

To delete a preset, proceed as follows:
Step Description
With SYSTEM CONTROL, select the PRESET function
1
An acoustic signal (beep) is sounded.
Device preset is loaded to work preset
Settings for the selected device preset are active immedi-
ately (all LEDs lit)
An acoustic signal (beep) is sounded.
The current settings from the work preset are stored under
the selected device preset (all LEDs lit)
119