Axion STIM-PRO X9B Instructions D’utilisation page 47

5. Setting the treatment time
Once the program is selected, press the SET key again. The
►
program stops flashing and the timer starts to flash. Press
ON/+ or OFF/− to select the treatment duration (if available).
The timer can be set from 5 minutes to 60 minutes or to
continuous operation C in 5-minute increments. Once the
EN
desired treatment duration is selected, press SET again to
return to the main screen.
Note: When using different programs for CH1/2 and CH3/4, the
treatment times can be set differently.
46