Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5
Level the appliance in the cupboard. Ensure that
the cover for the appliance lays flat on the
countertop. Bend the lower end of the fastening
bracket by 90° at the perforation. Screw the
fastening bracket on the appliance and on the
furniture bottom with the included sheet metal
screws.
6
Fasten the control unit to the side wall of the
fitted unit.
9
CAUTION
Penetrating moisture may cause electric
shock. Do not secure the control unit to the
base of the fitted unit.
10
7
Attach furniture strut. There are holes provided in
the appliance for fastening the furniture struts.
Screw the furniture struts to the appliance and to
the countertop with the included sheet metal
screws.
8
Depending on the installation situation, the
exhaust air outlet may run in three different
directions (A, B and C)
Notes
‒ Depending on the installation situation,
different connecting studs are required.
‒ Follow the instructions for the fan module for
exhaust air outlet.
.
Publicité
Table des Matières
