Bryton Rider 550 Manuel D'utilisation page 37

Installer le capteur de vitesse / cadence / capteur double (optionnel)

Capteur de vitesse

• Remove and immediately recycle or dispose of used batteries according to local regulations

and keep away from children. Do NOT dispose of batteries in household trash or incinerate.

• Even used batteries may cause severe injury or death.

• Call a local poison control center for treatment information.

• Battery type :CR2032 ; Battery voltage :3VDC.

• Non-rechargeable batteries are not to be recharged.

• Do not force discharge, recharge, disassemble, heat above (manufacturer's speci ed tem-

perature rating) or incinerate. Doing so may result in injury due to venting, leakage or

explosion resulting in chemical bums.

• Ensure the batteries are installed correctly according to polarity (+ and -).

• Do not mix old and new batteries, different brands or types of batteries, such as alkaline,

carbon-zinc, or rechargeable batteries.

• Remove and immediately recycle or dispose of batteries from equipment not used for an

extended period of time according to local regulations.

• Always completely secure the battery compartment. If the battery compartment does not

close securely, stop using the product, remove the batteries, and keep them away from

children.

Capteur de cadence

Retirez la languette de la batterie avant utilisa-

tion. Le capteur de vitesse / cadence intelligent

de Bryton contient une pile CR2032

remplaçable par l'utilisateur.