Using Useful Functions; Using Option Menu - Yamaha MCR-550 Mode D'emploi

Using option menu

The option menu appears on the front panel display by pressing OPTION. You can set various useful functions with
option menu.
Option menu
PRESET DELETE
TREBLE
BASS
BALANCE
1
AUTO CLOCK*
CLOCK SET
TIMER SET
1
* This function is available only for Europe, U.K. and Australia models.
1 2
Press OPTION. Select desired
option menu.
2
* When there are some parameters to set, repeat steps 3 and 4. You can go back to a previous parameter by pressing
3
* To set additional items, repeat steps 2 to 5.
y
To cancel the setting during the operation, press OPTION.
■ Setting tone/balance
TREBLE *4 : Adjusts the high frequency response.
BASS *4 : Adjusts the low frequency response.
BALANCE: Adjusts the volume level of each left and right speaker channel.
4
* Also effective when you are using headphones.
■ Adjusting the clock
AUTO CLOCK: Automatic adjustment function is available for Europe, U.K. and Australia models only. To apply for
this function, set AUTO CLOCK to ON.
CLOCK SET: To set hour and minute, repeat steps 3 and 4 on page 16.
y
• You can enter CLOCK SET directly by pressing and holding CLOCK when the unit is on.
• When setting the clock, you can also use the Numeric buttons to enter the hour and minute. To confirm the entry, press ENTER.
To clear the entry, press CLEAR.
• The current time appears on the front panel display for a certain period by pressing CLOCK when the unit is on.
Note
The time setting will be lost if you disconnect the power cable from the wall outlet for several minutes.
16
En

USING USEFUL FUNCTIONS

Parameter or control range
(Displays only when the input source is set to FM.)
–10 dB to +10 dB
–10 dB to +10 dB
L+5 - CENTER - R+5
ON/OFF
Hour, minute
Time (hour, minute), sound (source, track or preset number), volume,
timer on (every/once)/off
3
Confirm with
ENTER.
Repeat*
4
Change the settings.
2
Reference page
13
below
below
below
below
below
17
5 6
Complete the Exit option
3
setting.* menu.
.