Table des Matières
Publicité
12.
Place the first of the centre baseplates (38-B) on
the perpendicular fixing battens so that its left-
hand ridge overlaps the side baseplate.
Align vertically and secure with a single sealing
screw (39) in the centre of the ridge.
13.
Fix all remaining baseplates in the same manner.
Note:
The last baseplate is a narrow one.
14.
Slide the left and right side cover plates (34-A
and 34-B) under the outer slopes of the
baseplates.
Note:
The inner edges of the side cover plates must be
underneath the outer edges of the baseplates.
15.
Fix the outer edges of the side cover plates (34-
A and 34-B) to the roof battens using the fixing
plates (41).
Note:
The angled face of the fixing plates must face
upwards and the longer horizontal face must be
on the outside.
GB
34A
34A
38A
38A
21
8980P196
8980P197
8980P198
8980P199
Publicité
Table des Matières
