Maintenance; General; Maintenance Schedule - Husqvarna K 3000 Vac Manuel D'utilisation

General

WARNING! The user must only carry out the maintenance and service work described in this
!
manual. More extensive work must be carried out by an authorized service workshop.
Inspection and/or maintenance should be carried out with the motor switched off and the plug
disconnected.
Wear personal protective equipment. See instructions under the heading "Personal protective
equipment".
The life span of the machine can be reduced and the risk of accidents can increase if machine
maintenance is not carried out correctly and if service and/or repairs are not carried out
professionally. If you need further information please contact your nearest servicing dealer.
• Let your Husqvarna dealer regularly check the machine and make essential adjustments and repairs.

Maintenance schedule

In the maintenance schedule you can see which parts of your machine that require maintenance, and with which
intervals it should take place. The intervals are calculated based on daily use of the machine, and may differ depending
on the rate of usage.
*See instructions in the section "Machine's safety equipment".
** See instructions in the section "Cutting blades" and "Assembly and settings".
Cleaning
Functional inspection
Change
20 – English

MAINTENANCE

Daily maintenance
External cleaning
Cooling air intake
Vac attachment
General inspection
Power switch*
Power switch lock*
Blade guard*
Cutting blade**
Weekly maintenance/40
hours
Carbon brushes
Yearly maintenance
Gearbox grease