Whirlpool PACW9COL Mode D'emploi page 30

INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting
installation. Read and follow the instructions
provided with any tools listed here.
1. Tools needed
• Phillips screwdriver
• Saw
• Cordless drill and 1/8'' bit
• Scissors
• Pencil
2. Parts Supplied
The company provides only one plan to install local
air conditioner. See "Install local Air Conditioner".
Location Requirements
NOTES:
• The flexible exhaust hose allows placement of
the air conditioner between 23¹⁄₂" and 67" (60
cm and 170 cm) from window or door.
• Local air conditioners are designed as
supplemental cooling to local areas within a
room.
• To ensure proper ventilation, keep the required
distance from the return air outlet to the wall or
other obstacles at least 23¹⁄₂" (60 cm).
• Do not block air outlet.
• Provide easy access to grounded outlet.
Electrical Requirements
• The local air conditioner should be connected to
a 220-240V / 50Hz, 20-amp fused grounded
outlet.
• The use of a time-delay fuse or time-delay
circuit breaker is recommended.
• All wiring must comply with local and national
electrical regulations and be installed by a
qualified electrician. If you have any questions,
contact a qualified electrician.
Use your power supply cord:
Plug power supply cord into a grounded outlet.
NOTES:
• A damaged power supply cord must be replaced
with a new power supply cord obtained from
the product manufacturer and must not be
repaired.
A. Flexible exhaust hose
B. Window exhaust adapter
C. Outer slider section
D. Rain Cover
E. Inner slider section
Vertical Slide Window
Horizontal Slide Window
30
60 cm - 170 cm
60 cm - 170 cm