Mixx ANALOG PLUS Guide De L'utilisateur page 5

LET'S CONNECT
This turntable can connect to other external amplifiers or speaker systems via the Audio Out or via
Bluetooth. There are two different ways to connect:
1. Audio Out – if you have an amplifier or powered speakers with a Line In input, you can connect
the Audio Out sockets
the RCA/Bluetooth switch
2. Bluetooth – you can connect your turntable wirelessly to a Bluetooth speaker or headphones
by switching the RCA/Bluetooth switch
Bluetooth logo will show on the LED display
speaker or headphones and start pairing. If the connection is successful, the Bluetooth logo will
stop flashing. Now, the vinyl or the CD music will be transmitted to the speaker or headphones
wirelessly. Turn the volume control knob for the speaker or press the volume control buttons of
the headphones to adjust the volume.
LET'S PLAY A CD
1. Press the Power button
light up. CD mode is the default mode at startup, and "CD" will appear on the display.
2. Open the CD cover by pressing the CD door button
and the unit will now start to scan the contents of the CD.
3. The first track will be played automatically after it finishes scanning. A counter clock will also
show on the display
The track number will appear in the top right of the display and will change based on what
track the CD is playing.
4. Press Forward
or rewind by one song. Press and hold the buttons to Fast Forward or Fast Rewind.
5. Press the Play/Pause
the CD playback.
6. Press the Stop button
7. For repeat play, press Repeat
will show the repeat mode. Press Repeat again to cycle through the functions:
13
Repeat 1 song, Repeat All, Repeat Off.
07
01:20
1
Screen for reference only.
to your other equipment using a suitable RCA cable. Also ensure that
17
is set to RCA on the rear control panel.
18
21 on the remote or
13 showing how long the current track has been playing for.
24 or Rewind 27 on the remote, or
26 on the remote or
25 on the remote or
23 on the remote or
VR CD VR CD
02
33:00
1
18 to Bluetooth on the rear control panel. A flashing
13 . Then, turn on the Bluetooth function of the
16 on the front panel, and the LED display
, insert a disc and close the CD cover
5
12 or 8 on the front panel to move forward
11 on the front panel to suspend or resume
10 on the front panel to stop playback completely.
9 on the front panel, and the LED display
CD Mode
12
Track number
1 Repeat once
Track duration
3
VR CD
45:00
Repeat all
13 will
07
1
EN