Table des Matières
Publicité
Operator's guide:
1)Unpacking instructions
2)Opening the protective cover
3)Cleaning the internal basin
I
4)Cleaning the cover and external parts
5)Holders for containers and pastry shelves
UK
6)Support shelves
7)Connection to the mains
D
8)Controls
9)Checking correct operation
10)Internal cleaning
E
11)Replacement of the lamp
F
WARNINGS
!
It is most important that this instruction booklet is kept together with the appliance both for future
NL
reference and for reasons of safety.
1. Adults should operate this appliance only. Do not allow children to use the controls or play with it. 2
P
is forbidden to modify in any way the main functions and characteristics of this appliance. . The electrical
installation of the appliance should be carried out by a qualified electrician or other competent person.
S
4
. Never attempt to carry out repairs unassisted. Inexpert repairs can cause serious damage and
malfunction. . Assistance has to be provided by an authorized engineer only. Always use original spare
parts. . This appliance is not suitable for the storage of basic commodities not including food-stuffs.
6
DK
7
. The manufacturers of this appliance accept no responsibility for the consequences of misuse in
contravention of these safety instructions. It further reserves the right to carry out improvements without
FIN
prior notice. 8
sources of heat (such as radiators, stoves, etc) and drafts (such as windows, doors, ventilation systems,
B
air conditioning, etc ...)
that the products displayed on the shelves and grills do not hang over the edges.
GR
products to be refrigerated should cause ice to form on the evaporator, we recommend stopping the
compressor and placing the goods in special refrigerated containers, kept at the same temperature, until
CZ
defrosting is completed;if this is not carried out the compressor will continue to operate leading to a
wasteful consumption of electricity and poor performance.
EE
Our products are for internal use only do not install outside restaurants, shops.
LV
!
Remove everyday exceeding water through water tap.
LT
1. UNPACKING INSTRUCTIONS
H
CARDBOARD BOXES 1a.
WOODEN CRATE 1b.
M
between the appliance and pallet or crate.
the appliance on a flat, level surface.
PL
it. . Sort out the packaging materials in order to facilitate disposal. . The appliance can be locked in
7
place by engaging the wheel brakes (see fig. 1).
SK
2. OPENING THE PROTECTIVE COVER
1.
Plug the machine into the power supply socket, as described in Chapter 7.
SLO
electric lifting system (A) to position II until the cover is fully (see fig. 2).
3. CLEANING THE INTERNAL BASIN
1
. Remove the protection film from the stainless steel parts. . Clean the basin with a soft sponge and
neutral detergents.
4. CLEANING THE COVER AND EXTERNAL PARTS
1.
Never use detergents containing alcohol or solvents which would irremediably damage the cover,
compromising its transparency. . Use only a soft damp sponge. . As far as the wooden surfaces are
concerned, use proprietary detergents especially designed for wooden surfaces, which are water-based
and do not contain solvents. . Dry with a clean cloth.
5. HOLDERS FOR CONTAINERS AND PASTRY SHELVES
1
. Remove the protection film from the holders. . Place the slotted spacers "MANDATORY" in the slots
provided on the basin's rims. . Place the shorter holders in the slots provided in the longer holders.
Different arrangements are available for different container sizes and positions.
containers on the holders
fig. 3).
6. SUPPORT SHELVES
M LUX version
horizontal. Push down the edge near to the basin (B) until the shelf is firmly secured in place (see fig. 4).
5
. Avoid installing the cabinet directly in line with sunlight. .
.
10
. Keep the ventilation grills free from obstruction for at least 30 cm.
Cut surrounding tape. Remove the cardboard package by sliding it upwards.
Remove the nails from the wooden crate with care. . Insert forks of forklift truck
6.
2
4
3
. N.B.:
It is possible to place GN basins on different levels in Isola 8 only (see
: take hold of the bottom edge of the shelf and turn upwards (A) until the shelf is
Operator's guide
Maintenance manual (Page 18):
1)Cleaning the condenser
2)Access to the motor compartment
3)Replacement of the cover's lifting motor
4)Wiring diagram diagram of refrigeration unit
3.
Lift the appliance.
4.
Make sure there is nothing left in the package before disposing of
2
3
2
10
3
9
Never install the appliance near
12
. If damp air or
2
Remove the pallet or crate. . Place
8
2
. Turn the switch of the
4.
You can now put your
. It
11
. Ensure
5
Publicité
Table des Matières
