Publicité
Les langues disponibles
Les langues disponibles
5. Installation instructions
This camera is designed for indoor use only. If the camera is used outdoors, damage
may occur as a result of dampness and temperatures outside the prescribed range.
Outdoors the camera should be installed in appropriate protective housing so that it
is suitably protected against outside weather influences and remains in compliance
with the ambient operating conditions. This camera is equipped with an IR-cut and
can therefore be used in combination with IR illumination.
When using artificial light, make sure you use lights with a colour spectrum as near
as possible to daylight, since colour distortion can otherwise occur with colour
cameras.
The reason for poor picture quality is often bad-quality cabling. Make sure the
connections are properly crimped, avoid passive video signal distributors, and
always choose the shortest possible cable route between the camera and video
processing devices.
19
Publicité
