Maintenance/Repair - I.safe Mobile Is-Rsm3A.rg Mode D'emploi

Place the approved replacement battery in the battery compartment as shown. Make sure
that the gold-coloured contacts of the battery and the device face each other.
Hand-tighten the screws using the Torx Screwdriver provided.
Check that the battery is seated correctly and securely.
POSSIBLE DEVICE PROBLEMS
You can find information on possible device problems and how to rectify them at
www.isafe-mobile.com/en/support/service under the menu item "FAQ".
If you have any further questions, please contact the i.safe MOBILE GmbH repair service at
www.isafe-mobile.com/en/support/service

MAINTENANCE/REPAIR

The device itself has no serviceable parts.
WARNING
Incorrect repairs present a risk of explosion or fire, which can result in death or
severe injuries! Do not open the device or carry out any repairs yourself.
Contact the i.safe MOBILE GmbH repair service at
www.isafe-mobile.com/en/support/service if the device is not working normally, if the
device needs to be repaired or if a replacement part is required.
RETURN SHIPMENT
Contact the i.safe MOBILE GmbH repair service at
www.isafe-mobile.com/en/support/service
DISTRIBUTION PARTNER
You can find the specialist distribution partner responsible for your country at
www.isafe-mobile.com/en/contact
CLEANING
NOTICE
Incorrect cleaning can cause damage to the device. Please note the following when cleaning:
Turn off the device before cleaning.
Disconnect the device from all connected devices before cleaning.
Disconnect the the IS-DCRSM3.1 Desktop Charger from the power socket before
cleaning.
Do not charge the device while cleaning.
Do not use chemical agents for cleaning.
Clean the device and the IS-DCRSM3.1 Desktop Charger with a soft, moistened
antistatic cloth.
EN
13