Em24; Introduction; Description; Ucs (Universal Configuration Software) - CARLO GAVAZZI EM24 E1 Manuel D'emploi

EM24

Introduction

EM24 is a three-phase energy analyzer for DIN-rail mounting, with configuration joystick, frontal selector and LCD display.
The direct connection version (AV2, AV9) allows to measure up to 65 A, the CT connection version (AV5, AV6) allows to measure up to 34875
A by means of current transformers (5 A secondary output).
The DHCP function is able to speed the commissioning and all the configuration parameters can be set up via UCS.

Description

Part Description
A
LCD display
B Voltage/current connections
C Joystick
D Selector with pin for MID seal (programming block)
E Inputs/outputs or communication port
F
Pins for MID seal (protection covers included)

UCS (Universal Configuration Software)

UCS desktop is available for free download. It can be connected to EM24 via Ethernet (Modbus TCP/IP) .
The following is possible with UCS:
• configure EM24 (online or offline)
• view system status for diagnostics and configuration checks
AV2, AV9

function overview

AV5, AV6
EM24 E1 - Instruction manual | CARLO GAVAZZI Controls SpA 5