Emptying The Water Container - Electrolux Edi6284W Notice D'utilisation

CAUTION!
When cleaning the filters, the lint should
be thrown in the garbage bin and not
washed through the drain in order to
avoid spreading microplastics in the used
water system.
1. Open the door. Pull the filter up.
1
2. Push the hook to open the filter.
3. Gather lint with hand from both internal
parts of the filter.
Throw the lint in the dustbin.
4. If necessary, clean the filter with a
vacuum cleaner. Close the filter.
5. If necessary, remove lint from the filter
socket and gasket. You can use a
vacuum cleaner. Place the filter back
inside the filter socket.
104 ENGLISH
2
1
2
2

12.4 Emptying the water container

Empty the condensed water container after
each drying cycle.
If the condensed water container is full, the
programme stops automatically. The
water container symbol comes on the display
and you must empty the water container.
To empty the water container:
1. Pull the water container out keeping it in a
horizontal position.
2. Drain the water into a basin or equivalent
receptacle.
3. Place the water container back into
position.
4. To continue the programme press the
Start/Pause button.
1