Using The Device - Kibernetik Rks256 Retro Manuel D'utilisation

Kibernetik RKS256 Retro Drinks Fridge Black

5 | Using the device

Before use:
•
connecting the appliance to a power outlet for the first time, leave it
upright for at least 24 hours to allow the refrigerant to settle.
•
Remove the shipping packaging, tape, etc. and leave the doors open.
Ventilate the unit for a while.
•
The unit will be cleaned before shipping, but please clean the inside
of the compartment after delivery.
•
Connect the power supply, plug the device into the socket and make
sure the voltage is correct.
•
Allow the unit to run for approximately 1 hour to cool the
compartment before placing items in the cooler.
Wait 5 minutes or more before turning the device back on:
•
Restarting the unit immediately after it has been turned off may
cause fuses to blow, the circuit breaker to trip, the compressor to
overload, and/or other damage to occur.
℃ with a thermostat setting of 4-5 . If the ambient temperature is very high or
Temperature setting:
there are many contents in the refrigerator, the temperature may rise. In this
be decreased to prevent the internal temperature from falling below 0 ℃ .
case, the thermostat setting must be increased . If the ambient temperature is
very low or there are few contents in the cooler , the thermostat setting can
Very low temperatures in the cooler can cause the evaporator to freeze.
12