Replacing The Battery; Cleaning And Care; Disposal - LIVARNO LUX HG00146 Instructions D'utilisation Et Consignes De Sécurité

Ruban led 5m
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

is cycling, use the arrow buttons to
adjust the speed of the program
flow. Use the IC Set button to ad-
just the lighting range of the LED
strip.
Replacing the
battery (see Fig. D)
1. Turn the remote control over
and place it on a soft surface
to avoid scratching the remote
control.
2. Pull the battery compartment
out which on the bottom of
the remote control.
3. Remove the used battery, if
present.
4. Insert a new battery in the
battery compartment
Note: Make sure you insert the
battery with the correct polarity.
This is indicated in the back of
remote control.
Close the battery compartment.

Cleaning and care

Only clean with a dry
lint-free cloth.

Disposal

The packaging is made entirely of
recyclable materials, which you
may dispose of at local recycling
facilities.
b
a
which are marked with abbrevia-
tions (a) and numbers (b) with
following meaning: 1–7: plastics /
20–22: paper and fibreboard /
.
80–98: composite materials.
11
separately for better waste treat-
ment. The Triman logo is valid in
France only.
Observe the marking of
the packaging materi-
als for waste separation,
The product and pack-
aging materials are re-
cyclable, dispose of it
GB/IE/NI
15

Publicité

Table des Matières
loading

Table des Matières