Quick Start - Operating Your Cpap; Starting Therapy; Stopping Therapy - DeVilbiss IntelliPAP 2 DV63 Standard Plus Série Guide D'instructions

QUICK START – OPERATING YOUR CPAP
THERAPY

Starting Therapy

To turn blower on:
OPTION A
Press ON/OFF button OR
OPTION B
Breathe into mask**
Display
**if Auto-START/STOP feature is activated
EN - 2

Stopping Therapy

To turn blower off:
OPTION A
Press ON/OFF button OR
OPTION B
Remove mask**
Display
PRESSURE RAMP
When activated, this feature gradually ramps up the device to
prescription pressure to help you fall asleep easier. Ramp time
can be set from 0-45 minutes; refer to Features & Settings for
details on adjusting length of time.
To start ramp: To stop ramp: (begin
prescription pressure)
Press RAMP button
Press RAMP button again
Display
Ramp On
Display
(Time
Remaining)
HUMIDIFICATION
Humidification
Clean, fill and install humidifier
chamber daily. NOTE: Use distilled
water to avoid mineral deposit build
up inside the chamber.
To Set Humidification Controls:
1. Select Humidity.
2. Choose humidity setting
of OFF or 1 through 5 bars.
(NOTE- 5 bars is the
highest humidity)
Ramp Off
NOTE – For models with heated
humidification option, please refer
to humidifier guide for device set
up.
(optional)
A-DV64