Add-Ons; Bluetooth; Oximeter; Info - DeVilbiss IntelliPAP 2 DV63 Standard Plus Série Guide D'instructions

FEATURES AND SETTINGS

Add-Ons

This menu allows the connection of the
Nonin WristOx2 wireless oximeter.
® ®

Bluetooth

®
Bluetooth allows connection of the
Bluetooth enabled oximeter.
1. Select Bluetooth and press to
select On.
2. Select search.
3. Searching for Bluetooth
devices. Shows list of oximeters
in range. Click the item serial
number to pair with the CPAP.
For Airline Use – Select Bluetooth
and press to select Off.
EN - 16

Oximeter

Information on optional Nonin WristOx2 wireless oximeter.
1. Select Oximeter
2. Oximeter information
screen. NOTE – Refer to
Oximeter Instruction Guide
for details.
NIGHTLY
1. Connect wireless
oximeter to CPAP and place
probe on finger.
2. Wait until your CPAP
display shows the pop-up
message "Oximeter Logging
Started" which means your
CPAP is recording data from
the oximeter.
NOTE – If more than one
person in the house is using
a wireless oximeter, each
person must do this check
at a different time.
3. After recording is
finished, remove finger
probe and disconnect the
sensor cable from the
oximeter. The CPAP will
display a message 'Oximeter
Logging Stopped' and beep
once.


Info

Allows you to see basic device information.
1. Select Info.
2. Turn knob to scroll through
Compliance Meter, Serial Number,
Firmware, and BIOS screens.
A-DV64