Roland FC-7 Foot Controller Manuel D'utilisation

Roland
FC-7 Multi Foot
Thank you for purchasing
especially designed
Using this controller
Intro, Basic/Advanced,
Ending).
General Notes on
Please check carefully
Controller:
1) Make sure that the outer packing is not damaged and it contains inside
a) Foot controller
b) Instructions (this sheet)
2) Make sure that no damages appear. In case of damages or missing parts, please
give detailed information
How to connect
The FC-7 is provided
Insert the Connector
Pressing the relative
NOTE
The FC-7 is NOT a MIDl foot switch
instruments that are provided
Do not try to connect the FC-7 to the MIDl sockets.
Cleaning
Use a soft dry cloth for dusting. To remove dulling film, use a soft cloth slightly
dampened with water
DO NOT USE ALCOHOL
In the event your Foot Controller
FC-7 and the instrument.
In the event your foot
DO NOT attempt any adjustments
Controller
the FC-7 Multi Foot controller.
for Arranger Instruments
you can easily activate
Fill In to Variation,
delivery
the following things
to your dealer.
the FC-7 to the
with an attached
into the Instrument
foot buttons you can activate
controller.
with the dedicated
or a little mild detergent
OR SOLVENTS SUCH AS PAINT
fails to operate,
controller is still inoperable,
or repair by yourself.
It is a Multi Foot Controller
(Keyboards and Modules).
all the main functions
Fill In to Original,
when you receive the FC-7 Foot
arranger Instruments
cable and the relative
dedicated socket
the associated
It can be connected
"FC-7 Socket".
and immediately
THINNERS.
check the connection
contact
(Start/ Stop,
Original/ Variation,
connector.
(FC-7 socket).
functions.
only on
wipe dry.
between
your Roland dealer.
the