Pair With A Bluetooth-Enabled Device - Nyne NB-230 Manuel Utilisateur

To switch the device to standby mode:
Press and hold POWER.
•
The power indicator turns off.
+
To turn off power supply to the device:
• Slide the power switch on the back
of the device to the OFF position.
Pair with a Bluetooth-enabled
device
Before using the Bluetooth feature of
NB-230 for the first time, you need to
pair NB-230 with another Bluetooth-
enabled device, such as an iPod/
iPhone/iPad, Android smartphone,
PC, or Mac. After successful pairing,
each time when the paired device
(Bluetooth-enabled) and NB-230
are powered on and within the
detectable range (32 feet or 10m),
they will be wirelessly connected to
each other automatically.
Notes:
•
Make sure that your mobile phone
is compatible with Bluetooth profiles
HSP/HFP. See the user manual of
your mobile phone for details.
•
Make sure that wireless connection
has been set up between the
paired mobile phone and NB-230.
•
When there is an incoming call,
music play will pause.
10 EN
NYNE NB-230_User Manual_A5_V1.1.indb 10
1
Enable the Bluetooth function on
your device to be paired with
NB-230.
The device to be paired with
+
NB-230 enters Bluetooth
searching mode.
2
Press and hold
enter pairing mode.
The power indicator on the front of
+
NB-230 starts to flash red and blue
alternately.
After a while, "NYNE NB-230" is
+
displayed in the list of Bluetooth
equipment on the device to be
paired with NB-230.
3
Select "NYNE NB-230"on the
device to be paired with NB-230
to start pairing (if required, enter
the password "0000").
After successful pairing, the power
+
indicator on the front of NB-230
turns blue steadily and the speaker
beeps.
on NB-230 to
5/27/2012 9:11:58 PM