Whirlpool ALPHA 2 HybridCare WE99HEDW Instructions D'installation page 20

3.
Remove inner door from outer door
Position the door with the inside of the door facing up.
Using a Phillips screwdriver, remove the 10 screws securing
the inner door to the outer door. Lift off the inner door and
set aside.
4.
Remove hinge and latch
Using a T25 screwdriver, remove the 3 screws securing the
®
latch plate and latch backing plate and the 5 screws holding
the hinge assembly in place.
20
Latch
Hinge
5.
Reinstall hinge and latch on
opposite sides
Using a T25 screwdriver, reinstall the latch plate and latch
®
backing plate with the 3 screws removed earlier and the hinge
assembly with the 5 screws on the opposite sides from which
they were removed.
6.
Reinstall inner door assembly
Position the door with the inside of the door facing up. Using
a Phillips screwdriver, reinstall the 10 screws securing the
inner door to the outer door.
Bottom
of door