Provo Craft Cuttlebug Mode D'emploi page 6

Using Other Brand Dies
For Use With Non-Cuttlebug Thin Dies.
1. Position materials as shown, using
thin die adapter C instead of second
cutting pad B.
2. Move materials through Cuttlebug
machine byturning handle.
3. Remove all material from die;
discard unwanted pieces.
TIP
• For best results, experiment with scrap paper first.
Fig 6
Cutting pad
Cutting pad C
Paper
Paper
Cutting Die
Cutting Die
Cutting pad
Cutting pad B
Spacer
Spacer A