Safety Instructions - Meec Tools 024341 Instructions D'utilisation

SAFETY INSTRUCTIONS

Read these instructions carefully before use,
and save them for future reference.
• Keep the work area clean. Cluttered, damp
or wet work areas increase the risk of injuries.
• Keep children at a safe distance from the
work area. Do not allow children to
handle or climb on or in the product.
• Keep children and onlookers at a safe
distance from the work area. Keep
onlookers at least 2 metres away from the
product when in use.
• Put away tools that are not being used.
When not in use, store the product and all
the accessories in a dry place out of the
reach of children.
• Never use the product if you are tired or
under the influence of drugs, alcohol or
medication. If you are taking medication,
read the warning text to check whether it
may affect your judgement and reflexes. Do
not use the product if you are in any doubt.
• Wear suitable clothing. Do not wear
loose-fitting clothing, jewellery or a watch
that can get caught in moving parts. Wear
a hair net if you have long hair. Roll up
long sleeves over your elbows.
• Do not overreach. Always maintain a firm
footing and good balance.
• Be careful at all times, and use your common
sense when working with the product. Quick
precautions can prevent serious personal
injury and/or material damage.
• Check the product for damaged parts.
Check before use that the product is not
damaged and that it is working properly
and as intended. Check the product for
damaged parts and other factors that
could affect functionality. Repair or
replace damaged parts immediately.
• The guards and safety devices must be in
place and working properly.
• Replacing parts and accessories. Only use
spare parts and accessories recommended
by the manufacturer.
• Maintain and take good care of the
product. Keep the product clean and dry
for better and safer work.
• Maintenance. Servicing and maintenance
must be carried out regularly by qualified
personnel to ensure safe use.
• Do not force the product. Never overload
the product. Do not force small products
to do work that requires a more powerful
product. Never modify the product in any
way. Do not use the product for any other
purpose than the one it is intended to be
used for.
• Never leave the product unattended when it
is running. Do not leave the product before
all moving parts have completely stopped.
• If the product is used outdoors, only use
an extension cord approved for outdoor
use. Cords intended for outdoor use
reduce the risk of electric shock.
• The product should be connected to the
mains with a residual current device of
max 30 mA.
• Recycle surplus material in accordance
with local regulations.
• The product is only intended for
household use. The product must only be
used for its intended purpose and in
accordance with these instructions.
WARNING!
• Switch off the product immediately and
pull out the plug if the product is not
working properly. If the product is
damaged it must be checked and
repaired by qualified personnel before it
is used again.
• Switch off the product immediately and
pull out the plug if it starts to smell or
makes an abnormal noise. Take the
product to an authorised service centre
to be checked and repaired.
• This is a Class II product. To ensure safe
use, use original insulation materials for
repairs and to maintain the insulation.
SAFETY WARNINGS FOR
CONCRETE MIXER
• Switch off the product before moving it.
Switch off the product and pull out the
plug before transporting it.
EN
53