Yamaha RHINO 660 YXR660FAT Manuel Du Propriétaire page 86

1. Lever
2. On-Command four-wheel drive switch "2WD"/"4WD"
1. Levier
2. Contacteur de commande du mode de traction "2WD"/"4WD"
1. Palanca
2. Selector de tracción integral "2WD"/"4WD"
On-Command four-wheel drive switch "2WD"/
"4WD"
To change from 2WD to 4WD, stop the vehicle,
and then set the switch to "4WD". When the vehi-
cle is in 4WD, the 4WD indicator "
on in the multi-function meter unit display. To
change from 4WD to 2WD, stop the vehicle, be
sure the lever is set to position a, and then set the
switch to "2WD".
4-25
" will come