Extreme Max 3005.3377 Manuel D'installation

-naäuC7$
Warnings:
• Improper installation may result in injury or property
flush with dock faceboard
• Ladder weight capacity is 300 lbs. Do not exceed rated weight
• Step edges and certain contact points may be sharp. Be careful to avoid these
areas during assembly
Notice: Inspect ladder and hardware regularly for wear or damage. Replace worn, corroded,
or damaged parts prior
Ladder Parts:
(2) Hand Rails
(3) (4) or (5) Steps (Based on Model)
(4) M6-1.00 x 12mm Carriage
(4) M6-1.00 Nylock Nuts per Step
(4) M6 Flat Washers per Step
Footman Loop Relocation
(4) M5-.8 x 45mm Phillips Pan Head Machine Screws SS
(8) 5mm Fender Washers
(4) Locking Nuts .80mm SS
(2) Footman Loops
J-Hooks with Hardware:
(4) M6-1.00 x 10mm Fat Head Dome
(4) M6-Flat Washers SS
(4) M6-1.OOmm Nylock Nuts SS
(2) M6-1.00 x 55mm Carriage
(2) M6-1.00 x 30mm Carriage
(2) J-Hook Brackets
Figure 1
If there are any missing or damagedparts, DO NOT return the Angled Aluminum Ladderto the retailer.
To use your ladder in multiple
Customer Service: service@extrememax.com
Aluminum
Ladder Assembly
as shown in "Proper Pontoon Clearance".
and use.
to use.
Bolts per Step
Kit (Figure 1):
OD 38mm SS
Machine Screws
Bolts
Bolts
E-mail - service@extrememax.com
locations,
Pontoon,
damage. Mount ladder
capacity.
Tools Required:
• 10mm wrench or socket
• Phillips screwdriver
Figure 2
purchase additional quick-release
I www.extrememax.com
Swim Raft & Dock
& Installation
3 Step Ladder
3005.3377 -
4 Step Ladder
3005.3380 -
5 Step Ladder
3005.3383 -
Parts Diagram
40
Holes for direct-mount
installation
hardware (3005.3455)
3399ex0120