Page 2
Installation Instructions Read all information included on page 1 before beginning operation or installation. 1. For 5-step and 3-step ladders, place the tapered end of tube #1 into the hole on the angled end of each had rail, aligning the holes. For 4-step ladders, do the same but with tube #2. Be aware that the bolt holes on the tapered end of tubes #1 and #2 do not align with the other hole sets on the tube.
Operating Instructions Mounting: Due to the wide variety of potential mounting surfaces, installation mounting hardware is not provided. only marine-grade stainless steel hardware appropriate for your application. If unsure on the best installation technique, consult your local professional or dock service specialist for assistance.
Page 4
NON inclus. Hardware Garantie De Satisfaction Du Produit Chez Extreme Max, nous sommes fiers de fabriquer produits de qualité et souhaitons corriger toute erreur de 1/2"clé ou douille nécessaire notre part. Sl vous n'étes pas satisfait a 100% du produit, pour quelque raison que ce soit, veuillez nous contacter.
Page 5
Instructions D'installation Lisez toutes les informations figurant å la page 1 avant de commencer å utiliser ou å installer. 1. Pour les échelles å 5 et 3 marches, placez l'extrémité effilée du tube #1 dans le trou de l'extrémité coudée de chaque rail, en alignant les trous.
Mode d'emploi Montage: En raison la grande variété de surfaces de montage potentielles, le matériel de montage d'installation n'est pas fourni. Utilisez uniquement du matériel en acier inoxydable de qualité marine adapté å votre application. En cas de doute sur la meilleure technique d'installation, consultez...