Extreme Max 3005.3857 Instructions De Montage

-naäuC7$
Includes:
1. Shaft with Quick-Detach
2. Shaft with V-Block Assembly
3. Trailer Mounting Bracket x I
4. Rubber V-Bock x I
5. 5/16" x 1.75" Hex Head cap Screw x 1
6. 5/16 x 3" Hex Head Cap Screw x 1
7. 5/16" Lock Nut x 2
Rubber Bungee x 1
8.
9. 3/8" Washer x 2
10. 3/8" x 3.5" Hex Head Bolt
11. 3/8" Lock Nutxl
1
11
Read, Follow, and Save These
Warnings:
• Transom Savers are designed to prevent transom
bouncing only; they are not designed
• Rated for outboard motors
• Use the Transom Saver at the shortest
• Hydraulic pressure from trimming
into the V-block, stopping
• Regularly inspect the Transom
pieces before use.
Customer Service: service@extrememax.com
21" - 31" Transom
Mount
End x 1
x 1
x 1
Instructions.
damage during trailering
to support the full weight
up to 150 HP.
available length that supports
the motor into the V-block
as soon as they fully contact.
Saver, mounting bracket,
Saver with
Assembly Instructions
as a result of outboard
of the outboard motor.
your application.
may damage the Transom
Motor may tilt to the side slightly
and hardware. Replace any damaged,
I www.extrememax.com
Quick-Detach
3005.3857
motor spring back and
Saver. Lower the motor lightly
due to different model designs.
corroded, or missing
3399ex0120