Extreme Max 3005.3874 Instructions D'installation

-naäuC7$
Includes:
1. Aluminum Foot Tray x 1
Read, Follow, and Save These
Warnings:
• Due to the variety of boat manufacturing
cutout instructions are not available.
mounting hardware is not included.
results, use only high-grade
during installation. The mounting
allow flathead-style hardware
• Prior to cutting, determine
from potential obstacles, such as wiring,
bulkheads, hull or decking components,
that could become hazardous
the installer and/or boat.
• Wear appropriate safety gear at all times during
installation.
Installation Instructions
Read all information included
I. Determine the desired position
installation process.
2. Measure and mark a 17.66"
3. Using tools appropriate
4. Insert the tray into the cutout.
fasten the foot tray to the boat floor.
Product Satisfaction
At Extreme Max, we pride ourselves
not 100% satisfied with the product, for any reason, please reach out to us. We are here to help!
Warranty
This product is warranted for consumer
Warranty valid only in the USA.
This product is warranted to the original
wear and tear expected. This warranty
of goods or any acts of vandalism
commercial use. The sole remedy under this warranty
or similar product, or the refund of the original
incidental damages. Any and all freight charges to handle warranty
MaxTM is not responsible for any labor charges that may be incurred.
For all inquries please send your
summary of alleged defect and any applicable
Customer Service: service@extrememax.com
Trolling Motor
Instructions.
styles, exact
For this same reason,
To achieve the best
stainless steel hardware
holes are beveled to
for a flush mount.
that the cutout area is free
structural
and/or other items
to the health and integrity
on this page before beginning
for the tray. Inspect the area to ensure it is free of obstructions
x 10.08" cutout at this location.
for the task, create a cutout opening
Using the appropriate
Guarantee
on making quality
use for 2 years after the date of retail purchase. Warranty
retail purchaser to be free from defects in material
shall not apply to any defects caused by: (l) overloading,
by any person, (Ill) improper
purchase price. Extreme MaxTM is not responsible
name, mailing address,
pictures to service@extrememax.com.
Foot Control
Instructions
Tray Dimensions:
of
- Depth: 4.125"
- Flange: 19.4" length x 10.98" width
- Cutout: 17.66" length
operation or installation.
in the floor of the boat.
hardware appropriate for the boat floor design (not included),
products and wish to correct any mistakes on our end. If you are
installation or use contrary
is at the discretion of manufacturer:
claims are the responsibility
main contact phone number,
I www.extrememax.com
Tray Installation
3005.3874
1
x 10.08" width
that would hinder the
includes parts only.
and workmanship, ordinary
(II) physical abuse
to the instructions, (IV)
the replacement of the same
for any consequential
of the consumer.
original retail sales receipt,
or
Extreme
3518ex0121