Maintenance And Cleaning; Repair Service; Technical Datas - Fortuna POLYFIX Mode D'emploi

VIII. Maintenance and Cleaning
1. To guarantee a trouble-free function also for a long term it is necessary to clean
the dispenser regularly.
. Do not leave the dispenser empty without having it cleaned before to avoid blocking
of the valve balls! If this happens all the same please put the dispenser for some hours
in cold water or clean it by using ultrasound. Once the piston can be moved again,
dismantle and remove any residual impurities by cleaning with a normal solution.
3. The dispenser can be left on the bottle all the time if the channel system is filled.
4. When changing the dispensing liquid the dispenser should be cleaned.
IX. Repair Service
1. The POLYFIX dispenser is mainly maintenance-free and reliable. If there is a
®
problem or a defect and the user himself is not able to solve it, the faulty parts will
be exchanged through our dealer or the manufacturer. In case a repair would be
necessary, it must be done by the manufacturer or an authorized service station. This
does not refer to parts which are available as spare parts, such as piston with finger
guard, volume setting system, stopper cap, intake tube, adapters.
. Before returning the dispenser for repair please make sure that it is perfectly
cleaned to avoid any contamination.
3. Please operate the dispenser according to the operating manual to be entitled to
the warranty. Repairs must be carried out by the manufacturer or authorized service
stations.
X. Technical Datas
1. Volume Range - Subdivisions - Accuracy
Volume range
in ml
,0 - 10,0
10,0 - 50,0
The datas of accuracy and precision are established according to the German cali-
bration ordinance (PTB) at a room temperature of +0° C (+68° F) by using destilled
water. By using chemicals with a different viscosity or density a calibration on an
analytical balance is necessary.
2. Packing
POLYFIX dispensers 10ml and 50ml: single carton, 5,5 x 15,5 x 7 cm.
®
18
Graduation
in ml
0,
1,0
Accuracy Precision
A in %
0,5 0,1
0,5 0,1
CV in %