Fortuna POLYFIX Mode D'emploi page 14

4. Use only appropriate containers to dispense liquids. If using small bottles, please
use a stand.
5. Always make sure that the discharge tube does not point at the user or any other
person.
6. When transporting the dispenser please ensure that the piston is in zero-position
and no liquid is in the cylinder.
The stopper cap must close the discharge tube and the volume setting system
must be set at zero-position!
Never carry the dispenser at the finger guard, only at the PP valve block!
7. Please check the correct assembling of the dispenser and the tight fit on the
bottle before use.
8. To guarantee a trouble-free working please clean and use the dispenser according
to the operating manual.
9. Repairs if necessary must be carried out by the manufacturer himself or authorized
service stations only by using original parts.
II. The World of POLYFIX
POLYFIX 10 ml
®
Bottle top dispenser for aqueous liquids and acids. Piston made of precision ground
glass. Integrated glass dispensing cylinder, plastic coated. Valve block made of PP.
Valve system with Hastelloy metal spring in discharge channel. FIX adapter.
POLYFIX 50 ml
®
Bottle top dispenser for aqueous liquids and acids. Piston made of precision ground
glass. Integrated glass dispensing cylinder, plastic coated. Valve block made of PP.
Valve system with Hastelloy metal spring in discharge channel. FIX adapter.
Warning:
Please see the technical information about polypropylene.
This dispenser must n o t be used with solvents!
14
®
Art. No. 101.070-38
Art. No. 101.070-48