Route The Cables - Axis Tq1818-E Guide D'installation

5. For conduit installations only: remove the two conduit cover clips followed by the conduit
cover.
6. Attach the base unit to the mounting surface with appropriate fasteners in the four screw
holes.

Route the cables

WARNING
Risk of electric shock. The product shall be grounded using both the protective grounding wire
in the power cable and the grounding braid. Make sure both ends of the protective grounding
wire and the grounding braid are in contact with their respective grounding surfaces.
Important
Use only cables that comply with the specified cable area. For more information, see Cable
thickness, on page 30.
2
1 Conduit cover clip
2 Conduit cover
3 Screw hole (x4)
1
3
18