Foreword; Introduction; Preliminary Checks; Characteristics - Studio 54 OASIS 600 Mode D'emploi

INSTRUCTION FOR USE

1. Foreword

Thank you for having chosen one of our products, the result of technological expertise and continuous
search for a superior product in terms of safety, reliability and performance.
This manual contains all the information and advice in order to operate with maximum safety and
efficiency

2. Introduction

This publication provides instructions for use and maintenance, and includes the spare parts manual.
PLEASE FOLLOW CAREFULLY the instructions contained in this booklet.
USE ONLY ORIGINAL SPARE PARTS.
The instructions, drawings, schedules, and all that is inside this guide are of technical and confidential
nature. Any of these information can't be given to third parties without a written authorization by the
manufacturing company and sole owner, which has the right to make changes without notice.
In case of dispute please refer to the Italian chapter.

3. Preliminary checks

We recommend you to read carefully the owner's instructions, remembering that this guide is an
integral part of that machine, and it must be kept with care.
In case of loss or damaging of the present manual, don't hesitate to request another copy of it,
specifying the model and the date of purchase of the product.
THE PRODUCING COMPANY DECLINES ANY RESPONSIBILITY FOR DAMAGES RESULTING
FROM

ILLEGITIMATE USE

USING OF NOT ORIGINAL SPARE PARTS

NON-AUTHORIZED MODIFICATIONS ON THE PRODUCT

FAILURE TO COMPLY WITH THIS INSTRUCTIONS MANUAL
4. Elementary safety rules




The appliance must use an electric socket equipped with an automatic cut-out. Make also sure that
voltage and power line are suitable to the motor absorption which is mentioned on the CE label
UNPLUG BEFORE ANY KIND OF INTERVENTION TO THE ELECTRICAL PARTS: THE CONTACT
CAN CAUSE THE DEATH Warning! The electrical system is under power when the socket is plugged
in the power grid and the control unit is off.

5. Characteristics

The main characteristics, as dimensions, absorption, etc., are specified and identified on the CE label.
6. Preliminary checks
At the receiving of the product, please verify immediately the packaging integrity checking if there is
any transport damaging. Open the packaging and make sure that there are all the accessories.
If there have been transport damages, inform immediately the driver; within three days such
reservations must be confirmed by recorded delivery letter addressed to the forwarder, sending a copy
of it also to the producing company or its reseller.
Every claim must be notified within 8 days from the receiving of the goods, failure to do that the claim
shall not be accepted.
Unplug before any kind of intervention to the electrical parts: the contact can
cause the death.
Don't use the appliance with damp or wet hands or feet.
Unplug before cleaning the appliance.
Don't insert any screwdriver, kitchen utensil, etc. among the moving
components or the protections.
9