PCE Instruments PCE-SLM 50 Manuel D'utilisation page 9

Boutons de fonction

Paramètres

Quitter

Démarrer le test

Pause

Terminer le test

MODE D'EMPLOI

Preparations Before Testing

Ensure that all components of the sound level meter are complete and check that the host, pre-amplifier,

and microphone are properly installed.

Ensure that the device has sufficient battery power to last throughout the testing period.

In testing scenarios with high wind speeds, the sound level meter should be used in conjunction with a

windproof cover.

When monitoring outdoors for extended periods, it is recommended to use a tripod.

Powering On

Remove the sound level meter from its packaging and use the appropriate charger to fully charge it

before official use, ensuring the instrument operates normally during measurements.

Press the power button for 1 second; the startup animation will appear after about 3 seconds, and the

function menu will display after 25 seconds.

The current function menu includes settings, calibration, sound level meter, statistical analysis, and

monitoring applications. Enter the corresponding application interface by clicking or using the buttons.

Modifier

Sélection multiple

Supprimer

Imprimer

Filtrer